Description:

Portenta H7 simultaneously runs high level code along with real time tasks. The design includes two processors that can run tasks in parallel.H7’s main processor is the dual core STM32H747 including a Cortex M7 running at 480 MHz and a Cortex M4 running at 240 MHz.

SPECIFICATIONS :

• -Microcontroller STM32H747XI dual Cortex-M7+M4 32bit low power Arm MCU
• -Radio module Murata 1DX dual WiFi 802.11b/g/n 65 Mbps and Bluetooth (Bluetooth Low Energy. 5 via Cordio stack, Bluetooth Low Energy 4.2 via
• Arduino Stack)
• -Secure Element (default) NXP SE0502
• -Board Power Supply (USB/VIN) 5V
• -Supported Battery Li-Po Single Cell, 3.7V, 700mAh Minimum (integrated charger)
• -Circuit Operating Voltage 3.3V
• -Display Connector MIPI DSI host & MIPI D-PHY to interface with low-pin count large display
• -GPU Chrom-ART graphical hardware Accelerator™
• -Timers 22x timers and watchdogs
• -UART 4x ports (2 with flow control)
• -Ethernet PHY 10 / 100 Mbps (through expansion port only)
• -SD Card Interface for SD Card connector (through expansion port only)
• -Operational Temperature -40 °C to +85 °C
• -MKR Headers Use any of the existing industrial MKR shields on it
• -High-density Connectors Two 80 pin connectors will expose all of the board’s peripherals to other devices
• -Camera Interface 8-bit, up to 80 MHz
• -ADC 3× ADCs with 16-bit max. resolution (up to 36 channels, up to 3.6 MSPS)
• -DAC 2× 12-bit DAC (1 MHz)
• -USB-C Host / Device, DisplayPort out, High / Full Speed, Power delivery