The XS range is an offer of inductive proximity sensors for the detection, without physical contact, of metal objects. The advantages of inductive detection are numerous, no physical contact with the object to be detected. Thus avoiding wear and enabling detection of fragile or freshly painted objects. High operating rates. Fast response. Excellent resistance to industrial environments (robust products, fully encapsulated in resin). This product is a cylindrical, flush mountable sensor. Diameter 18mm, threaded M18 x 1. It features a nickel plated brass case and a M12 connector. It has a sensing distance of 5mm Four-wire, DC supply, 12V to 24V, solid state PNP + NPN, NO or NC programmable output.

Specifications:

Telemecanique XS1 Inductive Proximity Sensor
General purpose series
Cylindrical M18 design, size 72mm
Fixed body type, flush mountable
Metal material
Discrete output signal
4-wire wiring technique
Nominal sensing distance of 0.20 in (5 mm)
1 NO or 1 NC programmable discrete output function
DC output circuit type with PNP and NPN options
Male connector M12 with 4 pins for electrical connection
Rated supply voltage of 12…24 V DC with reverse polarity protection
Switching capacity of <= 200 mA with overload and short-circuit protection
IP67 degree of protection according to IEC 60529
M18 x 1 thread type
Frontal detection face with PPS material
Nickel Plated Brass enclosure material
Operating zone of 0.00…0.16 in (0…4 mm)
Differential travel of 1…15% of Sr
Yellow LED for output state 1
Supply voltage limits of 10…36 V DC
Switching frequency of <= 2000 Hz
Maximum voltage drop of <2.6 V (closed)
Current consumption of 0…10 mA (no-load)
Maximum delay first up of 5 ms
Maximum delay response of 0.15 ms
Maximum delay recovery of 0.35 ms
CE marking
Threaded length of 2.01 in (51 mm)
Total length of 2.83 in (72 mm)