The first network cable toner and probe to offer digital and analog signalling all in one network toner and probe. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs and trace voice, audio and video cabling.

Features:
Locates cables safely and effectively on active networks
Kit includes IntelliTone™ toner, probe, adapters, patch cables, and test leads
Verifies twisted pair installation with end to end continuity test
IntelliTone™ digital toning eliminates noise and false signals
SmartTone analog toning isolates individual wire pairs

Specifications:

General specifications:

Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
Storage temperature: -4 °F to +140°F (-20 °C to °C)
Operating relative humidity (% RH without condensation):
95 % (50 °F to 95 °F; 10 °C to 35 °C)
75 % (95 °F to 104 °F; 35 °C to 40 °C)
Uncontrolled < 50 °F (< 10 °C)
Vibration: Random, 2 g, 5 Hz-500 Hz
Shock: 1 m drop test
Safety: EN 61010-1, Category: None
Altitude: 3000 m
EMC: EN 61326-1, FCC Part 15 B
Battery type and life: 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Applications: Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cable Map function of the IntelliTone 200.
Toner specifications:

Dimensions: 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)
Display: LED
Control: Thumbwheel switch
Toner interface:
Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling
F Connector for coaxial cabling
Banana Jack Plugs (2) – two conductor wiring
Toner frequency:
IntelliTone signal: encoded digital signal
Analog SmartTone signal: 500 – 1200Hz, 4 songs
Output power: 5 V p-p
Auto power down: Turns off automatically after 2 1/2 hours of inactivity
Probe specifications:

Dimensions: 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)
Display: (8) LED indicators, Sync LED indicator
Audio:
IntelliTone: Microprocessor controlled audio files
Analog: Detected toner signal
Control: Thumbwheel switch, volume control wheel
Tone detection:
Detects IntelliTone digital signal for Locate, Isolate, and Cable Map
Detects analog SmartTone signal (500-1200Hz) and other analog toners
Toner interface: Main Mod8 port for Cable Map on all 4 pairs of UTP / STP cabling
Auto power down: Turns off automatically after 1 hour of inactivity