Description :

The FLIR Lepton 2.5 – Thermal Imaging Module is a radiometric-capable long wave infrared (LWIR) camera solution that is smaller than a dime, fits inside a smartphone, and is less expensive than traditional IR cameras. With a focal plane array of 80×60 active pixels, this Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal image sensor. The radiometric Lepton captures accurate, calibrated, and non-contact temperature data in every pixel.

Specifications:

•Effective Frame Rate: 8.6 Hz (commercial application exportable)
•Input Clock: 25-MHz nominal, CMOS IO Voltage Levels
•Output Format: User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied)
•Pixel Size: 17 µm
•Radiometric Accuracy: High gain: Greater of +/- 5°C or 5% (typical) Low gain: Greater of +/- 10°C or 10% (typical)
•Scene Dynamic Range: -10-140 °C (high gain); up to 450°C (low gain) typical
•Spectral Range: Longwave infrared, 8 µm to 14 µm
•Temperature Compensation: Automatic. Output image independent of camera temperature.
•Thermal Sensitivity: <50 mK (0.050° C)
•Video Data Interface: Video over SPI
•Control Port: CCI (I2C-like), CMOS IO Voltage Levels
•Package Dimensions – Socket Version (w x l x h): 11.8 x 12.7 x 7.2 mm
•Mechanical Interface: 32–pin socket interface to standard Molex® socket
•Non-Operating Temperature Range: -40 °C to +80 °C
•Optimum Temperature Range: -10°C to +80°C
•Shock: 1500 G @ 0.4 ms
•Array format: 80 × 60, progressive scan
•FOV – Diagonal: 63.5°
•FOV – Horizontal: 50° (nominal)
•Image Optimization: Factory configured and fully automated
•Non-Uniformity Correction (NUC): Automatic with shutter
•Sensor Technology: Uncooled VOx microbolometer
•Solar protection: Integral
•Input Supply Voltage: 2.8 V, 1.2 V, 2.5 V to 3.1 V IO
•Power Dissipation: 150 mW (operating), 650 mW (during shutter event), 4 mW (standby)