Description :

-Designed for multi-rotor projects, ideal for drone enthusiasts
-Capable of outputting large torques at low speeds and allowing full power operation at any speed
-High efficiency and strong overload capability, good regenerative-braking effect
-Small size, high power density, and simple drive control
-Adopts high-quality NSK bearings with strong durability, achieving stable rotation and high resistance to falls
-Internal oxygen-free winding copper set can withstand high temperatures of up to 220℃
-Maximum hollow design makes the motor lighter and improves thermal performance
-Unique assembly process guarantees 100% dynamic balance calibration for stable flight
-Equipped with a positive and negative thread, eliminates the safety hazard of multi-axis installed anti-propeller rear-shooting paddle
-Suitable for intelligent robots, drone line, and other industries, and professional aerial photography
-Note: Needs to be used with a drive plate.

-Specifications

•Motor:
1. KV value: 2480
2.Stator diameter: 18mm
3. Stator length: 4mm
4. Axis diameter: M5 (0.8mm)
5.Motor size(outside): Φ23×25.1mm (D * L) / Φ0.9×1.0inch
6. Weight: 16g
7. Power supply: 2-3 lithium batteries
8.Maximum continuous current: 5A
9.Maximum continuous power: 55.5W
10.Magnetic steel model: N40UH, ferrite boron magnetic steel
11.Bearing model: NSK
12.Silicon steel chip: 0.2mm cold-rolled low iron loss no-orientation silicon steel
13.Dynamic balance: 100% dynamic balance calibration
14.Copper wire: oxygen-free copper, with 220°C heat-resistant temp
•Drive board:
1.Continuous current: 20A
2.Peak current: 25A
3.BEC: NO BEC
4.Input voltage: 2-4 lithium batteries
5.Weight: 7.5g
6.Dimension: 27*12mm / 1.06*0.47inch