12V Battery Charging Controller Protection Board Module

SKU: BCBG0105 Brand:

In stock

SKU: BCBG0105 Category: Brand:

AED 28.57

In stock

Type ETA Cost
Inside UAE 2 - 3 Days 22 AED
Pickup 1 Day Free
International 4 - 7 Days 100 AED
  • International Delivery

International

4 - 7 Days

Will be calculated at checkout

  • Self Pickup

Pickup

Sameday

Free

  • Inside UAE Delivery

Inside UAE

2 - 3 Days

AED 29/-

Payment Methods:

Size of PCB: 50 x 32 x 18 mm
Default Value:
Low Voltage: 10.5 V
Shutoff Voltage: 14.8 V (adjustable, might be different)
Wiring Method: Please wire according to instruction. Do not change wiring.

Instruction:

Connect any wire of 220 V with the COM port of relay, and connect charger with OFF port.
The charger must be full bridge rectified output.
The DC output voltage can be between 13.8 and 14.8 V.
Charging test for the first time: battery voltage should be about 10 V.
Function 1: Current cannot be larger than 10 A.
Function 2: The board has reverse connect protection function. There is no output if no battery is connected. No output if the polarity of battery is wrong.
Output short circuit automatically shut down: It is a practical protection. As long as the output short circuit, the charger will automatically shut down output, so protect the charger from burning.
Adjustment:
VR1 relay disconnected to shutoff when battery charging voltage to 14.4 V. (shutoff voltage setting: clockwise lower, counterclockwise higher)
VR2 relay connected and began to charge when battery voltage is 10.5 V(low voltage setting: clockwise lower, counterclockwise higher)

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “12V Battery Charging Controller Protection Board Module”